How To Get Skateboard Bearings Out
How To Get Skateboard Bearings Out. By using the leverage with gentle pressure, the first bearing will pop. This should be done gently and slowly at a downward angle so that the wheel is unaffected as the bearing is removed.
If you don’t have it, no problem, use a ½” socket wrench because wheel nuts are usually 13mm, that’s ½”. By using the leverage with gentle pressure, the first bearing will pop. The assembly sits in the inner parts of the skateboard wheels.
Set The Nuts Somewhere You Will Not Lose Them.
In this step, you need to apply the theory of ‘leverage.’. You can see the bearings on both the top and bottom side of the wheel. Sometimes the balls can be difficult.
One End Of The Bearing Will Press Down Strongly Inside The Wheel, The Other End.
Use the lever to push the bearing off the wheel. If you know which wheel needs. Regular maintenance of the bearing is key for your skateboards’ lasting performance.
You Can Do This By Using A Bearing Puller Or By Prying Them Out With A Flathead Screwdriver.
1) remove the old bearings from the wheel. Now remove the nuts of the. There is no need to visit your local skate shop to clean or change the bearings.
Once You Remove The Nuts And Washer, You May Remove The Wheel.
Remove the axle nuts of your four skateboard wheels at the same time if you’re changing all the bearings. If you want to use that size, use 12 (13mm) wheel nuts. If you don't have a skateboard tool, or it doesn't have a sockets, use a crescent or sockets wrench.
Be Careful Not To Damage The Axle In.
If you have a nice flat workbench in. You should pry the wheel. Rate this post contents show 1 how to get bearings out of skate wheels 2 eliminating skateboard wheel bearings 3 cleaning up skateboard wheel bearings how to get bearings.
Post a Comment for "How To Get Skateboard Bearings Out"